Casting Machines
Lost Wax White Metal Finishing Rebuilt
Casting Supplies
Lost Wax White Metal Finishing Metals MSDS Sheets
Used White Metal Machines

Conley 9-12 DC Digital Air Cast Machine

Conley Furnaces
Literature
Home

TEL: 800-445-7900 • FAX: 401-781-9420 info@conleycasting.com   

© 2012 Conley Casting Supply Corp. •  124 Maple Street, Warwick, RI 02888, USA

Conley 160 Furnace/Gas, on a stand with analog control As-Is and Reconditioned. Rebuilt has new components, Robertshaw gas safety soliniod, 36" Thermocouple, Relining kit (inside and outside liner and insulation) COST: RECONDITIONED $995.00, REBUILT $1,495.00
Request More Info
Four Post Vulcanizers: In good working condition. Lee Casting Four Post, 35 ton, 220 Vac, 15 Amps. COST; RECONDITIOND $1,200.00, REBUILT $1995.00 WHEN AVAILABLE. FOB Warwick, RI 02888 Strapped on a skid boxed $100.00 (US only) Request More Info
Reconditioned
$995.00
Completely Rebuilt Digital
$1495.00
3 Post Vulcanizer-12
#160 Analog Gas
Furnace
Conley 9-12 DC
Digital air cast machine
Reconditioned 35 Ton
$1200.00
Rebuilt 30 Ton
$1995.00
AS-IS Reconditioned
$2500.00
Completely Rebuilt
$3695.00
Top Panel
Bottom Panel
Can handle molds 9" or 12" in diameter and up to 3" in thickness It has a 1/2 HP D.C. drive for quick and easy speed adjustment, Dynamic DC brake, Digital RPM readout is taken directly off the mold head shaft for accurate speed readout. Forward/Reverse switch, 0-60 PSI air regulator with 2" gauge up top for quick and easy read, removable tank for cleaning. 110 volts ac. Machine is Ring-Mold ready. AS-IS/ Reconditioned is in good working condition $2,200.00 - COMPLETELY REBUILT $3,695.00 - WHEN AVAILABLE
Request More Info
Reconditioned Casting Equipment
Reconditioned Casting Set-Up - All units are in good working condition, cleaned, and painted 3 Post Vulcanizer-12 — #160 Analog Gas Furnace — Conley 9-12 DC Digital air cast machine. CALL FOR CURRENT AVAILABLITY AND PRICE
Request More Info
Conley Four Post Vulcanizers
Rebuilt Accu-Mold 12 Vulcanizer
This vulcanizer has a welded frame construction with blanchard ground steel plates which ensure a parallel mold with in .032. The hydraulic jack (40 ton) with a 6” diameter ram and pressure gauge help maintain the near perfect flat mold. Heater platen size are ¾” x 14” square Blanchard ground steel plates. Heaters are sandwiched between the plate and a ½” thick piece of ceramic insulation. Future C21 digital controls maintain the heater platens at 300Fº plus or minus 3 Fº with a set point range of 300-315F° The controller is supported by a digital solid state timer which can be set from 1 minute to 99 hours. Power requirements are 220 Volt AC, 50/60 Cycle, 2400 Watts. Dimensions 17-1/2” wide, 15-1/2” deep and 37-1/4” high. Approximate shipping weight 650lbs.
Request More Info
Conley AC 9-12 Air Cast Machine

Can handle molds 9"-12" in diameter and up to 2" in thickness. It has a 1/3 HP A.C. drive with a manual speed adjustment. Digital RPM readout is taken directly off the mold head shaft for accurate speed readout. Forward/Reverse switch, disc brake, 0-60 PSI air regulator with 2" gauge up top, 120 volts AC, 8 Amps. Rebuilt $1,600.00 WHEN AVAILABLE
Request More Info