The standard three post design is incorporated with the solid features. Constructed of solid blanchard ground plates and platens with ceramic insulation. With mica heaters powered by dual Digital solid state control and fuzzy logic. The heart of vulcanizer is the 80 ton Accu-Ram with a six diameter piston for great stability and accurate procedure, measure by a 5,000 psi liquid filled gauge. Conley 18 inch DC Digital Air Cast Machine
This standard top load design has great features that you will not find on other 18” machines. The 8” piston that is incorporated into the six post mold head. The tachometer is read directly from the main shaft that supports the mold. A solid cast aluminum cover plate locks molds into a six station locking head to eliminate mold parting lines. Conley 12 inch Accu-Mold Vulcanizer
Another Exciting Innovation from Conley The Conley AccuMold Vulcanizer has been designed to produce molds of uniform thickness. Obviously a flat mold is more likely to produce casting without distortion than a mold that is wedged shaped or uneven. The heart of the Accu-Mold system is a custom designed large bore ram that insures that the heater plates remain parallel during vulcanizing. Conley DC Digital Air Cast Machine
The D.C. motor delivers a smooth, constant torque linear drive that reduces vibration in the mold, that can inhibit metal flow. Complementing the drive system the digital readout is taken directly off the spin shaft to ensure the accuracy of mold speed at all times. A light weight cover plate assist the operator to increase production." descriptionArray[4]="Conley front door air cast machine Conley Front Load Spin Caster
Conley front door air cast machine Conley Vulcanizer Four Post
Like new Four Post Vulcanizer with a 30 ton hydraulic jack and Dual Solid state temperature controllers. Conley White Metal #160 Electric Furnace
Has a capacity of 160 lbs. Lead, 100 lbs. Pewter, 80lbs. Zinc. It is mounted on stand and wired to the digital control. The temperature is controlled by the Future 4100 Digital control is supported by a type J T/C inserted into a cast iron well. Conley White Metal #160 Gas Furnace
Has a capacity of 160 lbs. of Lead or 100 lbs. of Pewter it is mounted on stand and piped with a 110-volt Robertshaw gas safety solenoid valve and 36 inch thermocouple attached. The temperature is controlled by the Future 4100 Digital control is supported by a type J T/C inserted into a cast iron well. Natural or propane gas operated. Gas consumption is 30,000 BTUs per hour. Conley White Metal #80 Electric Furnace
Soft metal electric melting furnace.Will melt up to 80 lbs. of lead.Temperature range is 175 - 850°F.This unit is great for model metal or small production. Used White Metal Casting Machines